Blog

BX ring gaskets can fail due to improper installation, material degradation, excessive pressure or temperature, surface damage, or incorrect sizing. Prevention involves following precise torque procedures, selecting compatible materials, inspecting sealing surfaces, and adhering to manufacturer specifications.

This article explores whether spiral wound gaskets can be manufactured in non-rounded shapes to suit non-circular flange geometries.

Standard spiral wound gasket dimensions are determined by the flange size and pressure class, following standards such as ASME B16.20. Key measurements include the inner ring inside diameter, sealing element width, and outer ring outside diameter, which correspond to the nominal pipe size and raised face specifications.

Learn the proper steps to install an oxygen free copper gasket, including surface preparation, handling, and torque techniques to ensure a reliable, leak-free seal.

A step-by-step guide to correctly installing OFHC copper gaskets for optimal vacuum sealing performance.

Learn the key distinctions between V shape metallic tape and aluminum foil tape, including their material composition, adhesive properties, and ideal applications.

PTFE film can withstand a maximum continuous service temperature of approximately 260°C (500°F), with brief excursions possible up to higher temperatures depending on the specific application conditions.

Discover the best practices for cleaning and maintaining PTFE fiber products to extend their lifespan and preserve their non-stick, heat-resistant qualities.

Learn the proper techniques to cut PTFE hose cleanly, avoiding crushing, fraying, or contamination.

While PTFE balls offer excellent chemical resistance and low friction, they are prone to rapid wear, deformation, and material loss in abrasive environments, which severely limits their service life and reliability.